Concrete Floors That Earn
Their Keep in Kansas City.
Single-day polyaspartic installs engineered to shrug off Midwest freeze-thaw cycles, road salt, dropped sockets, and the hot tires of a Saturday in the garage.
(913) 435-2628
Tap to talk to a coating specialist
50+
Five-Star Reviews
A Local Crew Quietly Replacing
Yellowed Epoxy Across the Metro
Floor Shield of Kansas City is the polyaspartic specialist Jason Ittel built to outwork the franchise coating companies blanketing the metro. We work from a Mission Hills shop, install a single product line, and finish every job with the same crew who showed up to measure.
Garages, basements, finished interiors, and commercial slabs all get the same multi-layer polyaspartic build — diamond-ground prep, hand-broadcast flake, and a clear topcoat that ignores UV, salt, and the chemicals that live in a working space.
How We're Different
- Polyaspartic-only — no epoxy bait-and-switch
- Diamond-ground prep, crack chase, and joint repair on every install
- Same crew from on-site walk-through through final topcoat
- Licensed, bonded, and insured for residential and commercial work
A Coating Catalog Built Around One Job: Yours
Every install — garage, basement, showroom, or back room — gets the same polyaspartic build, the same crew, and the same single-day turnaround.
Garage Floor Coatings
Decorative-flake polyaspartic systems built for hot tires, dropped tools, and the chemicals that live in a working garage. Installed and walkable inside 24 hours.
- Hot-tire pickup-proof topcoat
- Shrugs off oil, brake fluid, and de-icing salt
- Hand-broadcast flake — pick the palette
- In, out, and back on the floor in 24 hours
- UV-stable — stays clear, never ambers
Residential Interior Coatings
Polyaspartic finishes for sunrooms, mudrooms, kitchens, and laundry rooms where you want seamless, mop-clean concrete instead of grout lines, carpet, or LVP.
See the build
Commercial Floor Systems
Showrooms, breweries, mechanic bays, and warehouse aisles get a high-traffic polyaspartic build with slip-rated topcoats and a return-to-service schedule that keeps revenue moving.
See the build
Basement Floor Coatings
Moisture-tolerant polyaspartic systems that turn a cold basement slab into a finished surface — home gym, theater, workshop, or kids’ play space.
See the build
Polyaspartic Coating Systems
Faster cure, tighter adhesion, and full UV stability vs. legacy epoxy. The Floor Shield system layers a penetrating basecoat, a hand-broadcast flake, and a clear topcoat built to outlive the slab beneath it.
See the build
One-Day Install Service
Bare concrete in the morning, finished floor by evening. Our polyaspartic chemistry skips the multi-day epoxy cure and gets you back to using the space tomorrow.
Why Floor Shield
The reasons homeowners and shop owners pick us over the franchise coating crews that blanket the metro.
A Polyaspartic-Only Shop
There is no downgrade option, because there is no reason to install one. Every Floor Shield job uses the same multi-layer polyaspartic build — no upsells, no last-minute epoxy swap.
In and Out the Same Day
Diamond grinding in the morning, basecoat by lunch, hand-broadcast flake and clear topcoat by mid-afternoon. Walk on the floor the next morning and roll vehicles back in at 72 hours.
Tuned for Midwest Slabs
Our coating stays bonded through Kansas City freeze-thaw, ignores the road salt tracked in from January driveways, and never softens under a July garage that pushes past 100°F.
A Flat Number Before We Start
Estimates are itemized and signed at the on-site walk-through. The number you agree to is the number on the final invoice — no add-ons for prep, crack repair, or flake.
Licensed, Bonded & Insured
Full coverage on every job protects your home, your business, and our crew — from the first grinder pass through the final walk-the-floor inspection.
Built to Outlive the Slab
A properly prepped polyaspartic floor does not need a refresh in five years. It resists UV, chemicals, abrasion, and impact for decades, backed in writing on the coating system.
How a Floor Shield Install Runs
Four predictable steps between bare concrete and a floor that outlasts everything else in the room.
Request the Walk-Through
Call (913) 435-2628 or send us your address. We schedule the on-site visit, usually inside the same week.
Measure, Match & Quote
Jason or a senior crew lead inspects the slab, walks you through flake blends and topcoat options, and leaves a flat, itemized number behind.
Diamond-Ground Prep
Install day opens with a full diamond grind, crack chase, and joint repair — the boring half of the project that decides how long the floor actually lasts.
Same-Day Coating & Cure
Basecoat, hand-broadcast flake, and clear polyaspartic topcoat go down in one shift. Walk on it in 24 hours, drive on it in 72.
Recent Installs Around the Metro
Finished garages, basements, and commercial slabs from Johnson, Wyandotte, Jackson, and Clay counties.
Where We Install
Floor Shield works both sides of State Line — from Johnson County garages and Mission Hills basements to Jackson County showrooms, Clay County warehouses, and the older homes north of the river.
Notes From Kansas City Floors
What homeowners, shop owners, and operations managers say after their Floor Shield install.
“We booked Floor Shield on a Thursday and had a finished garage by Sunday. One Kansas City winter in and the floor still looks like installation day — no chips, no peel where the tires sit, no salt staining at the door.”
“Our shop floor was a maze of stains and crack lines. The crew ground it flat in a morning and broadcast the flake by mid-afternoon. We were open the next business day, and customers comment on the floor before they comment on the inventory.”— Local Business Owner
“We finished the basement with a polyaspartic floor instead of LVP and the gym down there looks like a showroom. Easy to mop, no grout to chase, and the dog cannot scratch through it.”— Johnson County Homeowner
Frequently Asked
Questions
Properly prepped and installed, our system is built to last the life of the slab. The polyaspartic chemistry resists UV yellowing, chemical staining, tire and foot-traffic abrasion, and impact from dropped tools without the periodic re-coats epoxy floors need to stay presentable.
Polyaspartic cures in hours, not days. Most customers walk on the new floor 24 hours after we leave and roll vehicles back in at the 72-hour mark. Compare that to a traditional epoxy job that can keep you off the slab for five to seven days.
Every project covers a full slab inspection, diamond grinding, crack chase and joint repair, a penetrating basecoat, a hand-broadcast decorative flake layer, a clear polyaspartic topcoat, and final cleanup. No add-on column on the invoice — the price you sign at the walk-through is the number you pay.
Polyaspartic cures in hours where epoxy needs days, stays clear under UV instead of ambering, holds up better against road salt and brake fluid, and stays flexible through the Kansas City freeze-thaw cycle. The material costs more — and the floor lasts long enough to justify it.
Yes. Call (913) 435-2628 or submit the form on this site. Every estimate is on-site, no-obligation, and includes a flat, itemized number you can compare line-by-line with any other coating crew you bring out.
We cover the entire Greater Kansas City Metro on both sides of State Line — Johnson and Wyandotte counties in Kansas, Jackson and Clay counties in Missouri, plus the surrounding communities. If you can reach Mission Hills in under an hour, we install there.
Still Have a Question?
Send us a note — Jason or a senior crew lead answers personally, usually the same day.
Contact Us
Ready to Stop Looking at
Bare Concrete?
Lock in your install date — most quotes go on the calendar the same week we measure.
Schedule My On-Site QuoteOne install day. One crew. One floor that outlasts the rest of the build.